This error is detected when the value of the Printer Protection Counter reaches its limits.
Keep in mind that what you are about to reset is the printer protection counter and not the chipset in your Continuous Ink System. Inknovation uses Autoreset chips in all our CISS.
Instruction:
1. Download and install SSC. There will be an icon on the desktop after finishing installing SSC Service Utility software.
2. Click this icon; you can start the main menu as the below picture shown.
a) Choose the printer model which you’ve installed driver in the first grid.
b) Choose the corresponding printer model supported in second grid.For some special printer models, such as CX5100, you can choose CX5200
c) Click the two choices in the small window below. The first one means don’t load Epson status agent service at startup; and the second means starting utility at Windows startup.
3. Click “REFRESH” and check whether ink volume is displayed as the following picture shown. If not or over 100%, it means the printer hasn’t been recognized. Then you can delete printer driver and re-install driver or re-start the computer so that the printer can be recognized.
4. When the printer can be recognized, close the window. Then you will see a small SSC image in the taskbar as the below picture shown.
5. Click right button of mouse on SSC image then you can start its functions.
6. “Protection counter” is the most useful function. When printer has printed lots of papers, it shall indicate, “the components have reached its life span”. At this time, two lights on panel will blink alternatively. Actually the truth is not like what the notice says. The reason for this problem is that EPSON has setup a “Printing Paper Record Utility” on the mainboard. When finish printing the fixed pages, it will suggest changing the waste ink pad. In fact, it still can be used for a long time. At this point, you can click the “Protection counter” and choose “ Reset protection counter” to clear the records as below picture shown.
7. Click “Yes” when there's a dialogue frame come out as below,
8. Then click “OK”. The waste counter is resetted.
9. In the end, turn off printer and switch it back on again. Now you have finished the “SSC Procedure”.
Note: Other useful uses of this utility.
1) Reset or rewrite any chip using special addon device.2) Freeze internal ink counters.
3) Reset internal ink counters even with empty cartridges.
4) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
5) Resetting of protection counter (even then it is already full).
Download link http://www.ssclg.com/download/sscserve.exe
No comments:
Post a Comment