Canon Resetter PIXMA iP1000

Canon PIXMA iP1000
Waste Ink Counter Reset Manual for Service mode

1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

khusus buat ip 1000 (dari pengalaman pribadi), gunakan yg ini aja :

If you are having ink waste error in Pixma IP1000, dont use the PIXMA IP1000 reset tool. It wont work. Just use the
Pixma IP1500 reset tool. Just download it from here:

http://www.printersiam.co...1500%20Service%20Tool.zip

1. Extract the file into a folder
2. Run the tool
3. Select the USB Port

Warning !!! Follow this carefully. DOn't click at other buttons

4. Click the Main button under the 'Clear Waste Ink Counter'
You will find the printer light will blink.
5. CLose the tool and turn off the printer and turn it on back again

Voila!!! the printer is reset. If you are unable to select the USB Port and your printer is blinking green and orange light please reset the printer using the manual procedure first (see below) and then try using the IP1500 reset tool.

- Turn off the printer, and disconnect the printer cable
- Press and hold the POWER button, turn on the printer
- The Indicator (LED) should be green
- Press and release the RESUME button, the Indicator (LED) should be orange
- Press and release the RESUME button again, the Indicator (LED) should be green
- Release both button