Stylus Photo 1270

A Stylus Photo 1270 that has all the LEDs flashing is indicating a maintenance request error. Reset the waste ink counter to clear the error. http://epsonresetter.blogspot.com

MP150/MP160 ERROR CODE

MP150/MP160 ERROR CODE
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full

E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error

How to clear E27 Code

* With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
* When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
* When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
* When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)

* Turn off the printer.( it must be turn off) then turn it on again.

Reset Ink Level Canon PG-40/CL-41/PG-50/CL-51/CL-52 Cartridge

Reset Ink Level Canon PG-40/CL-41/PG-50/CL-51/CL-52 Cartridge

To reset the ink Level (method 1)

1. Paste with a thin strip tape the upper horizontal row contactjes
   Out of the cartridge (Picture 1)
2. Insert the cartridge into the printer and close the lid.
3. The printer will now on the move, but wait until there on the screen Your computer is the message that there is a wrong way to a Ink cartridge is loaded. Click OK in the message
4. Open the lid of the printer and remove the cartridge from there.
5. Download Now the strip of adhesive tape and paste it contact now on the Second row (from top) horizontal contactjes. (Picture 2)
6. Insert the cartridge into the printer back again and closed the lid. Weather will The printer is on the move again, and again we place an alert on Your monitor. This time, the message that the cartridge can not Be recognized. Click on OK again
7. Open the printer and remove now for the last time the cartridge from the
   Printer.
8. Remove the tape and insert the cartridge in the printer and connect it Lid.
9. The printer is the cartridge back as a new and indicates that the cartridge full again

Resetting the ink Level (method 2)
Works only in some cases

1. Paste with a thin strip tape the bottom row of horizontal contact The cartridge off
2. Insert the cartridge into the printer and close the lid.
3. The printer will now on the move, but wait until there on the screen Your computer is reported that on one wrong way Ink cartridge is loaded. Click OK in the message
4. Open the lid of the printer and remove the cartridge from there.
5. Download Now the strip of adhesive tape and paste it contactjes now on the Contact uppermost horizontal row.
6. Insert the cartridge into the printer back again and closed the lid. Weather will The printer is on the move again, and again we place an alert on Your monitor. This time, the message that the cartridge can not Be recognized. Click on OK again
7. Open the printer and remove now for the last time the cartridge from the Printer.
8. Remove the tape and insert the cartridge in the printer and connect it Lid.
9. The printer is the cartridge back as a new and indicates that the cartridge full again

resetter canon i255

1. Tekan tombol power lalu tancapkan kabel power.
2. Sambil masih menahan tombol power tekan resume 2x.
3. Lepas kedua tombol.
Memory Write
4a. Jalankan software reset1.
http://www.printersiam.com/data/download/i320.exe

5. Pilih port USB.
6. Klik set destination1.
7. selesai.
Printer akan menjadi i350, jadi mesti dl driver baru di:
http://drivers.soft32.com/driver/download-Canon_i350-23413.html

4b. ato software reset2.
http://www.cyber-ink.com/tools/i255tool_XP.zip

Canon IP1200, IP1600, IP2200

Silahkan Download Untuk Canon IP1200, IP1600, IP2200

Untuk seri PIXMA 1000 atau 1500

1. Download PIXMA service tool di Sini
2. Extract file nya
3. Lakukan prosedur service mode pada printer dengan cara :
- Matikan printer, cabut kabel data USB dan kabel power
- Tekan dan tahan tombol POWER, colokin kabel power, hidupkan printer
- Indikator LED akan berwarna HIJAU
- Tekan dan lepas tombol RESUME, indicator LED akan berwarna KUNING
- Tekan dan lepas tombol RESUME sekali lagi, indicator LED akan berwarna HIJAU
- Lepas tombol POWER

Saat ini printer dalam MODE SERVICE

11. Lakukan prosedur reset waste ink tank dengan cara :
12. Colokin kabel data USB
13. Jalankan program GeneralTool
14. Tampilan akan seperti ini untuk IP1000 :
15. Atau seperti ini untuk IP1500 :
16. Pilih parameternya no 1
17. Tekan tombol no 2 menurut seri printer canonnya
18. Selamat… printer udah direset

NOTE : JANGAN GUNAKAN SERVICE TOOL i320/i255 YANG DARI PRINTER SIAM, KARENA AKAN MERUBAH BIOS IDENTIFIKASI PRINTER MENJADI CANON i350

Epson CX2800 adjustment

Epson CX2800 adjustment
http://www.divshare.com/download/2703400-41d

Epson CX2800 adjustment
http://www.divshare.com/download/2703400-41d

Reset Canon i6100

Reset Canon i6100

• Turn off the printer.
• Press and hold the RESUME button, then press and hold the POWER button.
• Release the RESUME button, next press and release the RESUME button two(2) more times in succession, then release the POWER button.
  
• Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press.
  

1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM – Initialization.
4. Reset the Waste ink counter.
5. Printer model setting.

Resetter Canon iP1600

Resetter Canon iP1600

Waste Ink Counter Reset.

Step 1 : Manual Temporary
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect the printer cable.
4. Close door, then release power button.

step 2 : Software iP1600ServiceTool for Permanant
1. Open General Tools software
2. Select (USB PORT)
3 .Click DEVICE ID
4. Select EEPROM CLEAR
5. Click TEST PATTERN 1
6. Turn off the printer

Reset Canon iP 1880

* (1) Press Resume button and hold for 1-2 minutes.
* (2) Open the Cover.
* (3) Release the Cartridge and then Put them ON again.
* (4) Close the Cover.
* (5) Turn OFF the printer.
* (6) Turn it ON again.

For more details and download,

Resetter Canon iP1600, Reset Epson C58, Reset CX6500, CX1500 Resetter, Reset Canon i6100, MPC110 Reset Procedure, Resetter CX4100, Canon iP1700 Ink Waste Resetter, Reset Canon iP1880, CX2800 Resetter, Canon MP150 Reset Codes.

This Service Manual contains basic information required for after-sales service of the laser beam printer LBP-3260 (hereinafter referred to as the "printer"). This information is vital to the service technician in maintaining the high print quality and performance of the printer.

Table of contents Canon LBP-3260 Printer Service And Repair Manual
Chapter 1: Product information
Features, specifications, operation, and installation

Chapter 2: Operation and Timing
A description of the operating principles and timing sequences of the electrical and mechanical systems.

Chapter 3: The Mechanical System
Explanation of mechanical operation, disassembly, reassembly and adjustment procedures

Chapter 4: Troubleshooting
Troubleshooting procedures, reference values and adjustments, maintenance and servicing, etc.
Appendix: General timing chart, general circuit diagram, etc.

Download Canon LBP-3260 Printer Service And Repair Manual

MP150/MP160 ERROR CODE

MP150/MP160 ERROR CODE
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full

E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error

How to clear E27 Code

• With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
• When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
• When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
• When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)

• Turn off the printer.( it must be turn off) then turn it on again.

Canon BJC 6200

I have a Canon BJC 6200. It's blinking 6 x orange and 1 x green et
doesn't want to print. I found a first explain : waste Ink error
(http://www.uktsupport.co.uk/canon/bj/bjc6200.htm)

I've replace the waste (sponges). impossible to reset the error :
Waste Reset
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound
once.
3: Hold POWER and release RESUME
4: Press RESUME twice then release BOTH POWER and RESUME buttons
5: When the indicator lights becomes steady, press RESUME three(3)
times. The indicator should be ORANGE.
6: Press Power to set data

No beep at the second item !
1 : OK
2 : the LED is Green
3 : id
4 : the LED is orange (1st PRESS), then gren (2nd PRESS)
5 : the LED is blinkind 6 x orange and 1 green (no action when i press
RESUME)
6 : the printer power OFF

Reset Printer Canon BJC-5x/8x/M40/M70

1. Unplug Power Cord
2. Hold POWER and RESUME buttons
3. Plug in Power Cord
4. Release buttons after the printers starts up
5. Hold CARTRIDGE and RESUME
6. Press POWER
7. Release all buttons after the beeps
8. Press CARTRIDGE 16 times
9. Press RESUME
10. Unplug the Power cord

Canon Resetter PIXMA iP1500

Canon PIXMA iP1500
Waste Ink Counter Reset. Manual for Service mode

1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.)
should be orange.
5. Press and release the RESUME button again, the indicator
(L.E.D.) should be green
6. Release both buttons

Canon Resetter PIXMA iP1000

Canon PIXMA iP1000
Waste Ink Counter Reset Manual for Service mode

1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

khusus buat ip 1000 (dari pengalaman pribadi), gunakan yg ini aja :

If you are having ink waste error in Pixma IP1000, dont use the PIXMA IP1000 reset tool. It wont work. Just use the
Pixma IP1500 reset tool. Just download it from here:

http://www.printersiam.co...1500%20Service%20Tool.zip

1. Extract the file into a folder
2. Run the tool
3. Select the USB Port

Warning !!! Follow this carefully. DOn't click at other buttons

4. Click the Main button under the 'Clear Waste Ink Counter'
You will find the printer light will blink.
5. CLose the tool and turn off the printer and turn it on back again

Voila!!! the printer is reset. If you are unable to select the USB Port and your printer is blinking green and orange light please reset the printer using the manual procedure first (see below) and then try using the IP1500 reset tool.

- Turn off the printer, and disconnect the printer cable
- Press and hold the POWER button, turn on the printer
- The Indicator (LED) should be green
- Press and release the RESUME button, the Indicator (LED) should be orange
- Press and release the RESUME button again, the Indicator (LED) should be green
- Release both button

Resetting Canon PIXMA MP800 Error 6A00

Canon PIXMA MP800 Error 6A00
-Remove a piece of paper that was stuck in the printer
-pushed down on sponges
-moved ink cartridge holder back and forth several times
-unplug printer completely
-removed all the ink cartridges and put them back

The Problem
1. The print head cartridge keeps locking itself up on the right hand side.
2. Frequent 5100 errors even when the printer is on standby
3. Even when I wipe up the print cartridge, the next print will mess up the bottom of the print cartridge with ink again.

here step to fix steps:

1. Opening the cover and wait for ink carriage to center
2. Pull out power cord
3. Pushed carriage to far left (should slide easily)
4. Used paper towel and wiped purge unit a lot of times (press down to soak paper towel with ink). Repeat until the paper towel is relatively clear.
5. Used diluted napisan (oxygen-based cleaning agent in the ratio of 1:3 with powder:water) and soaked paper towel
6. Repeat step 4 with wet paper towel. Repeat until purge unit is near-white.
7. Pulled and pushed clear plastic wiper (north of purge unit) and wiped it down
8. Slided carriage back to original position
9. Removed Print head cartridge and wiped out excess ink stuck on bottom.

Clearing Common Errors on Your Printer

Ever have blinking lights on your inkjet or laser printer that just will not go away? Ever install a new ink cartridge in your printer and it still thinks the old one is there? Well, instead of just getting angry at the printer or hunting around for your manual, you can try one simple thing: unplug it.

This technique has a few names that all mean the same thing: cycling the printer, resetting the printer or clearing the printer’s memory. Now unplugging your printer may seem like a low-tech solution to complex problems, and in reality it is. But, for problems like blinking error lights it is the only solution and also, it is typically the first one that will be recommended to you by a technician working for HP, Lexmark, Epson etc. They will recommend it right away if you install a new cartridge and it is registering as empty. If your printer isn’t registering it full, then that means it still thinks the old cartridge is in there and the memory needs to be cleared by unplugging it.

The first thing to remember about this solution is that unplugging the printer is not the same as turning the printer off. If you have error messages or cartridge communication problems, then turning off the printer is not going to do anything. It has to be physically unplugged from the wall or the back of the printer itself (you don’t have to unplug the printer from the computer). The second and most important thing is that the printer must be unplugged for at least one minute. It takes at least one minute for all the electricity to be cut off from the printer to allow it to completely reset and clear its memory. If you just unplug it for a few seconds, when it comes back on it is going to pick up right where it left off.

While this technique will not fix every problem, it is still a very quick and easy solution to a lot of annoying printer problems and it is always the best place to start when one of those problems arises.

Catalogue: Computer | Hardware
Title: Clearing Common Errors on Your Printer By: Carlos Smith

CANON PIXMA iP1800

Features

* Photo lab quality: max. 4800x1200dpi*
* Fast document printing with sharp text
* Prints a photo lab quality 10x15cm borderless photo in approx. 70 seconds*
* ChromaLife100 system for long-lasting, beautiful photos**
* Easy-to-use software included

Stylish and easy to use home printer: sharp text and photo lab quality prints



Photo lab print quality
This affordable printer delivers a high 4800*x1200dpi print resolution using a FINE Cartridge and 2pl ink droplets. The end result is detailed and vibrant colour output for all your photo prints.

Fast document printing with sharp text

Print sharp and clear text documents at up 20 pages per minute in black and white, thanks to the additional black cartridge. Or print in brilliant colour at up to 16 pages per minute. It's the ideal solution for homework, business reports and all your correspondence.

Fast borderless photo printing

Print a photo lab quality 10x15cm borderless photo in approximately 70 seconds in Standard mode*. Take advantage of fast borderless photo printing on a range of sizes right up to A4, with Easy-PhotoPrint.

Long-lasting prints

Canon's ChromaLife100 system delivers beautiful photographs with enhanced durability up to 100 years** to preserve your memories. By using the FINE Cartridge, genuine Canon inks and genuine Canon photo papers, the system provides you with long-lasting, beautiful photos.

Easy-to-use software

Get the most out of your printer in the simplest way possible with easy-to-use software. Print beautiful digital photos in just a few clicks with Easy-PhotoPrint. Create and print albums, calendars, print on stickers and also easily print basic layouts using Easy-LayoutPrint. Get perfect web printouts without the loss of page edges with Easy-WebPrint.

Stylish design

This stylishly designed printer fits perfectly in any surroundings. The PIXMA iP1800 is deep gleaming black and has a mirror finish - while the corners are in a strong matte black. The printer is Windows and Mac compatible with convenient USB connectivity.

Reseter Canon ip1700,1300

Reseter Canon ip1800,iP 1200, 1300, 1600, 1880, 2200, 2500

Reset Printer Canon BJC-3000/6x00/7x00/8000

1. Power off printer
2. Hold Resume button then press and hold POWER, the beeper will sound once.
3. Hold POWER and release RESUME
4. Press RESUME twice
5. When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6. Press Power to set data

iP-Tool

Resetter Canon iP 1200, 1300, 1600, 1800, 1880, 2200, 2500

reset Ink Counter
Reset Waste Ink Counter
Print Head Cleaning
Cleaning
Dry Level
Change Model
EEPROM Operation
and Print Head Test

Download: http://rapidshare.com/files/83111240/iP-Tool.rar.html

EEPROM Printer Canon ip6210D/6220D/MP170/MP450/2200/ip600
http://rapidshare.com/files/84956378/iP6210D-iP6220-MP150-MP170-MP450.rar

MPTool MP150/MP160/MP170/MP180/MP450/MP460
http://rapidshare.com/files/84957750/MPTool.rar

Canon BJC-2000 BJC-2100 Serie

Canon BJC-2000 BJC-2100 Serie

1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Close Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

Reset canon Pixma iP1000

Melakukan reset permanen pada printer pixma ip1000 anda silahkan ikuti intruksi dibawah ini

Tahap pertama anda harus menghidupkan printer pada keadaan service mode
caranya :

1. Lepas kabel POWER dan USB.
2. Buka pintu printer dan TEKAN+TAHAN tombol POWER
3. Pasang lagi kabel POWER
4. Tutup pintu printer, lepas tombol POWER.
5. Nyalakan printer seperti biasa & seharusnya sudah tidak blinking lagi

Setelah ini silahkan gunakan tool resetter ip 1000 untuk mereset permanen
software dapat didownload disini

Types of Lexmark Inkjet Cartridge

Did your printer run out ink? This could have been a major setback in the past especially if you were printing something that was urgently required. But thanks to the introduction of printer cartridges that we can relax and carry on with our work by simply changing the cartridge.

Lexmark Inkjet Cartridge understands the quality of your printer and gives you best output. It works efficiently with your printer and maintains its quality. This cartridge is especially recommendable for you Lexmark printer model. Lexmark Cartridge delivery systems utilizes comparatively less water and concentrated inks in order to provide more intense colors by sharpening the text. Its ink features comparatively less paper distortion. As it is one of the best competitive brands it is rich in its qualities.

. Inkjet Lexmark Printer Z517:

Up to 4800 x 1200 dpi on photo paper
Up to 2400 x 1200 dpi on all other paper types
Up to 12 ppm on black print outs
Up to 7 ppm on color print outs
It irtually eliminates paper jams while handling a wide range of media from envelopes to paper stock up to 150 lbs.

. Lexmark Z23 Inkjet Cartridge

Lexmark Z23 Inkjet Lexmark cartridges generate optimum print quality using pigment-based ink for text that is water resistant and fade resistant for document storage.

Inkjet Printer Z715

1. Photo-quality resolution! Up to 4800 x 1200 dpi on photo paper in best mode
2. Up to 2400 x 1200 dpi on all other paper types
3. Quick Printing: Up to 17 ppm black, up to 10 ppm color
4. Print Border-less 4" x 6" and 8.5" x 11" photos that look just like traditional photographs.
5. Print a 4" x 6" photo image in normal mode on photo paper in about 60 seconds
6. Six-color printing with optional photo cartridge (sold separately) produces professional quality

Canon PIXMA iP2000 Printer User Guide

Canon PIXMA iP2000 Printer User Guide

Inkjet Lingo

Aren't acronyms fun? LOL (laugh out loud). However, they sure can be confusing when selecting printers and inkjet inks. Most sites are good about defining the acronyms they use at least once, but finding that "once" isn't always as easy as it looks! Knowing how to speak "inkjet" will help you choose both the printer and the inkjet ink you need to get the kind of results you want! Here are a few inkjet acronyms and other terms to help with your searches for inkjet printers and related products:

AIO (all in one) and MFP (Multifunction Printer) - AIO and MFP are often used interchangeably and stand for printers that include a copier, a scanner, and frequently have fax capabilities as well. Relatively new in the marketplace, All-in-Ones are an affordable way to set up a comprehensively equipped home office.

CMYK- Inkjet colors: C=cyan, M=magenta, Y=yellow, and K=black. The first inkjet printers were three-color printers (CMY) that mixed colors to produce black. Today's printers generally have the capability to simultaneously use both black and colored inks on the same page.

DPI- Dots per inch. Measures the resolution of images produced by printers, scanners, etc. Typically, more dots per inch means that the image will display with more detail.

OEM- Another way to say brand name (or name brand). Actually means Original Equipment Manufacturer

PPM (pages per minute) and CPM (copies per minute) - How many sheets your printer will spew out per minute. PPM usually means printing directly from the printer and CPM denotes copies from a scanned item.

Aside from acronyms, other inkjet terms frequently appear when searching for inkjet printers, medias, and inks:

Bulk ink- Sold either as compatible printer ink or universal printer ink (see below). The difference between bulk ink and refill kits is that bulk ink doesn't come with either tools or instructions. Unless you are experienced in refilling inkjet cartridges and have the necessary tools on hand, a better money-saving refill solution is a compatible inkjet refill kit.

Compatible cartridge- Either a brand new inkjet cartridge or a remanufactured cartridge, which contains ink that is specially formulated to work with a particular model of printer.

Ink Refill Kit- Inks, tools, and instructions to refill your empty ink cartridge. Refill kits are generally less expensive than either new or remanufactured inkjet cartridges and are sold separately to refill black inkjet cartridges. Color refill kits typically come with one or more sets of CMY ink.

Remanufactured cartridge- Remanufactured cartridges are recycled cartridges that have been cleaned, factory inspected, and refilled with new compatible inkjet ink.

Universal ink- Several vendors advertise ink that is compatible with ANY printer. If that were true, then any ink would work in any printer. The truth is, they won't. Different ink viscosities (see below) and different sized print heads vary between both printer brands and printer models. If you don't have the option of choosing ink that is formulated especially for your printer, don't buy it.

Viscosity- Viscosity is how sticky the ink is. The higher the viscosity, the stickier the ink. Viscosity is a word that you will rarely see mentioned on ink cartridge sites, still it is a very important word when it comes to purchasing the appropriate ink for your inkjet printer.

Inkjet Printables provides tons of useful information on discount ink cartridges and other inkjet accessories. br>
(c) Niall Roche - All Rights Reserved http://www.inkjet-printables.com

Reset Waste Ink full canon

Reset Waste Ink full canon
1) Enter SERVICE MODE. By pressing Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of
3)), and then press the [ON/OFF] key

Canon BJC

Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265
Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650

Unplug Power Cord
Hold POWER and RESUME buttons
Plug in Power Cord
Release buttons
Open front door of printer
Hold the CARTRIDGE and RESUME buttons
Press POWER
Release all buttons after the beeps
Press CARTRIDGE once
Press RESUME

mp150

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

Tapi pas gw lakuin ternyata boro2 masuk ke service mode yg ada malah printer gw mati lg krn tombol power nya di pencet lg (Opt No.2)
nah akhirnya gw yg gw lakuin adalah:

1. Tahan tombol Stop/Reset trs pencet tombol power trs lepas lg tombol power nya(tombol Stop/Reset tetep ditahan), kl ga dilepas tombol power nya kan printer nya ga idup tuh.
2. Ketika printer nya dah idup dan stand by siap nge-print(bkn pas warming up), pencet dan tahan tombol power lalu pencet tombol Stop/reset beberapa kali(berhubung waktu itu ngasal gw lupa brapa kali nya ;p)
3. Lepas tuh tombol power biar printer nya mati, trs idupin lg... kl hoki MP-150 nya bisa nge print lg hehehe.