Waste Error Reset :
ERROR : Used ink tank is full
1. Remove the Cartridge
2. Unplug the AC Power Cord
3. Close Front access panel
3. Hold down the RESUME/RESET button and plug in the AC power cord
4. Release RESUME/RESET after plugging in the AC Power cord.
5. Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6. Press and HOLD RESUME/RESET for two seconds or more and release it.
7. Press and HOLD RESUME/RESET for two seconds or more and release it.
8. Unplug AC Power Cord to set data
If you need nore info try here :
- http://www.neilslade.com/papers/inkjetstuff.html
Wem, Try soaking the print head in a shallow dish/plate of hot distilled water to remove any dried out ink. You may need to repeat the process a few times to fully unclog the print head.
ERROR : Used ink tank is full
1. Remove the Cartridge
2. Unplug the AC Power Cord
3. Close Front access panel
3. Hold down the RESUME/RESET button and plug in the AC power cord
4. Release RESUME/RESET after plugging in the AC Power cord.
5. Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6. Press and HOLD RESUME/RESET for two seconds or more and release it.
7. Press and HOLD RESUME/RESET for two seconds or more and release it.
8. Unplug AC Power Cord to set data
If you need nore info try here :
- http://www.neilslade.com/papers/inkjetstuff.html
Wem, Try soaking the print head in a shallow dish/plate of hot distilled water to remove any dried out ink. You may need to repeat the process a few times to fully unclog the print head.
No comments:
Post a Comment